COMP 273 Sequential Circuits, RAM and Multiplication Assignment

1 Warm-Up Question

Implement a sequential circuit that displays your McGill ID one digit at a time on a row of 10 LED lights (shown below). You have the clock as an input to your sequential circuit.

For example, your McGill ID is 260 Light 2 should be on in the first clock cycle, light 6 should be on in the second clock cycle, light 0 should be on in the third clock cycle, etc. Extend the provided led.cire to implement your answer. You are allowed to use any circuits from logisim. However, you CANNOT use any automatic circuitry. Optionally you can use: tunneling and "adding a circuit" from the project menu

2 Sequential Multiplication

Create a sequential circuit that implements a 4 bit unsigned multiplier following the design of the simple sequential multiplier seen in class (either the simple version or the improved version). Your circuit will have a RESET input. On a rising clock edge, when RESET is high, your circuit should initialize its internal registers with the 4 bit inputs A and B, and then start the multiplication on subsequent clock cycles when RESET is low. Your circuit should also provide a DONE signal that goes high when the 8 bit result is ready. You may use anything you like from the default Logisim library (eg., wiring, clock, gates, plexers, memory), but you should only use one Adder circuit from the Arithmetic part of the library. You CANNOT use any prebuilt/automatic circuits. Optionally you can use: tunneling and "adding a circuit" from the project menu. Use the provided file to create your circuit, as it already defines the inputs and outputs.

Get your COMP 273 Sequential Circuits, RAM and Multiplication assignment solved by our Computer Science Experts from Exam Question Bank . Our Assignment Writing Experts are efficient to provide a fresh solution to all question. We are serving more than 10000+ Students in Australia, UK & US by helping them to score HD in their academics. Our Experts are well trained to follow all marking rubrics & referencing Style. Be it a used or new solution, the quality of the work submitted by our assignment experts remains unhampered.

You may continue to expect the same or even better quality with the used and new assignment solution files respectively. Theres one thing to be noticed that you could choose one between the two and acquire an HD either way. You could choose a new assignment solution file to get yourself an exclusive, plagiarism (with free Turn tin file), expert quality assignment or order an old solution file that was considered worthy of the highest distinction.