Assessment Title Assessment 2 Practical Assignment

Assessment Title Assessment 2 Practical Assignment

Unit Code and Title CPCCBC4005 Produce labour and material schedules for ordering

Qualification Code and Title CPC40120 Certificate IV in Building and Construction (Builder)

CPC40120 Certificate IV in Building and Construction

(Site Manager)

CPC40320 Certificate IV in Building Project Support (Estimator)

Business Unit / Workgroup Future Industry & Trade / ABS

Instructions

Method of Assessment Practical Assignment

Overview of Assessment The aim of this assessment is to assess your practical knowledge of:

Building application relevant to a project

Organisational policies and procedures for:

Costing and ordering materials

Selecting and engaging suppliers

Approving and contacting contractors

Workplace safety requirements relevant to a project

You may reference the Learner Guide and other relevant resources and learning materials to complete this assessment.

You are to answer the questions based on processes that should be implemented in a typical workplace setting.

Task/s to be Assessed This assessment contains the following Three (3) Tasks:

Task 1 Identify Building Application Information

Task 2 Identify Organisational Policies and Procedures

Task 3 Identify Workplace Safety RequirementsTime Allowed Students are required to submit this assessment by the due date which is published on Learn. Submissions may be sent earlier than stated due dates.

Location of Assessment Assessment outlines and resources will be available via LEARN (online classroom) and you will work in a simulated workplace environment on or off campus.

A simulated workplace environment may consist of, but not be limited to an area of a commercial or residential room which may contain:

Workstation set to an appropriate ergonomic height and accompanying chair

Desk top computer or laptop

Reliable internet access

Landline telephone or mobile phone

Appropriate lighting

Industry reference material

Decision Making Rules To achieve a Satisfactory outcome, you must satisfy all assessment criteria and evidence requirements as stated in the assessment instructions.

Application for Extension

No late submissions will be accepted without prior Application for Extension form filled out before the due date, with new completion date and time with written Lecturer approval.

TAFE SA requires supporting documentation for this application to be processed (see TAFE SA policy of accepted supporting documentation).

Assessment Conditions This assessment is unsupervised. It may be conducted in a simulated workplace environment (in a classroom on campus) or in a blended environment (online) via Learn.

You are required to work independently on this assessment.

You are encouraged to contact your Lecturer if you encounter any access issues or if you are unsure of written directions.

Your Lecturer may clarify questions or help with interpretation and cannot provide answers. Your Lecturer may also aid with contextualising terminology and definitions if needed.

All work submitted must be your own work.

Once you have completed the assessment, you must then submit all completed tasks via the allocated Submission Portal on Learn.

Academic Misconduct (Plagiarism or Cheating)

You must ensure that the work you submit is your own and/or acknowledge the work of others by referencing the authors appropriately.

Where Academic Misconduct occurs, for minor breaches students may be required to undertake an additional assessment to provide evidence of attaining the requirements of the component of study; or if it is a serious or deliberate offence, a student will fail the assessment.

Reasonable Adjustment

Opportunity for reasonable adjustment to be provided in accordance with students Disability Access Plan (DAP). Adjustment must not undermine the integrity of the assessment process or assessment criteria.

Depending on the learning difficulty of the student, reasonable adjustments for this assessment may include:

Allowing extra time in the assessment task

Verbal answering of questions instead of writing

Special Considerations based adjustments are due to individual circumstances affecting the students ability to undertake the assessment. Details of the meaning of Special Consideration can be found in the Assessment and Academic Grievances Policy.

Refer to Learn site for Application for Extension.

Resources Required Resources that YOU require for this assessment include:

Desktop computer or laptop

Reliable internet access

Access to Word and PowerPoint

Printer / photocopier / scanner

If you are unable to access these resources then you must use the campus facilities to complete your assessment.

Your Assessor will provide you with the following via the Learn platform:

Access to Learn site CPCCBC4005 Produce labour and material schedules for ordering

Learner Guide - CPCCBC4005 Produce labour and material schedules for ordering

CPCCBC4005 ASI - Student Instructions Assessment 2.docx

Resources

To complete this assessment, you the assessor will provide the students with access to the following Resources:

Computer with Internet, email access, and a working web browser

Installed software: MS Word, Adobe Acrobat Reader

Organisational policies and procedures relevant to resolving business disputesResult Notification and Reassessment Information Your Lecturer will mark your submission within two (2) weeks of you submitting your answers to the questions. You will receive your feedback and your result via Learn.

Feedback is to be given whether the submission is Satisfactory or not and will outline what result you have achieved and what responses to the questions, if any, need improvement.

To receive a Satisfactory outcome for this assessment you must have submitted your assessment before your given due date.

Reassessment or re submission information will be provided by your assessor and will be required to be addressed within two (2) weeks after receiving feedback.

If your assessment is deemed Unsatisfactory you are allowed one (1) re-submission to be completed within the negotiated time organised with the Lecturer.

ASSESSMENT TWO

Practical Assignment

Preliminary Assessment InformationThe tasks in this practical assessment must be completed in the context of a building and construction project which you are currently a part of.

For example, you are a site manager in training in this project.

When completing the tasks in this practical assessment you must ensure that your responses and performance align with the information you have provided below.

For example (but not limited to):

If the task asks you to refer to building and construction legislation and regulatory requirements, refer to the requirements that apply to South Australia where your building and construction project is undertaken.

If the task requires you to follow organisational policies and procedures, refer to the policies and procedures supplied to you.

Work role / title Site Manager

Organisation / workplace You must record here the name of your nominated organization, e.g., Cascade Peak Construction Pty. Ltd.

Building and construction project Aldgate

Project overview The project is the construction of a single-storey residential dwelling

Building classification Class 1

Project site address 28 Wallaby Street, Aldgate SA 5154

State / Territory where this project is being undertaken South Australia

Practical Assignment

OverviewThe goal of this assessment is to assess your practical knowledge of:

Building application relevant to a project

Organisational policies and procedures for:

Costing and ordering materials

Selecting and engaging suppliers

Approving and contacting contractors

Workplace safety requirements relevant to a project

This assessment has Three (3) Tasks:

Task 1 Identify Building Application Information

Task 2 Identify Organisational Policies and Procedures

Task 3 Identify Workplace Safety Requirements

This task must be completed in the context of the workplace you have nominated in the Preliminary Assessment Information section.

You are required to:

Identify information about the building application process relevant to the project you are working on,

Access and review workplace policies and procedures relevant to:

Costing and ordering materials

Selecting and engaging suppliers

Approving and contacting contractors

Identify workplace safety requirements relevant to the project you are working on,

Review the task instructions included in this Practical Assignment

Record your response as required in the instructions.

Resources required for assessment.

Project documents relevant to the application process that the building and construction project you are working on went through,

Documentation regarding workplace safety requirements relevant to the project you are working on,

Workplace policies and procedures:

Costing and ordering materials

Selecting and engaging suppliers

Approving and contacting contractors

ASSESSMENT TWO

Practical Assignment

Answer the following questions about the building application process and conditions in the locality where the building and construction project you are working on will take place.Whats the project start date?

Answer

Based on the projects locality, to which government entity must building applications be submitted?

Answer

Outline the building application process required as per the PlanSA Portal Stages and Timeframes.

Answer

.

.

.

.

.

.

.

.

.

.

.

.

.

According to the Decision Notification Form has the Development Approval been granted?

Answer

YES NO

According to the Decision Notification Form at what stages of construction must the council be notified for the purpose of inspection?

Answer

.

.

.

.

.

Briefly explain why the project required approval.

The following link provides information on types of construction projects and their approval requirements:

Types of consent | PlanSAAnswer

Identify three (3) concrete mix suppliers suitable for the project.

Answer

1.

2.

3.

How would you contact and communicate to the suppliers of concrete mix regarding the projects costs?

Answer

.

.

.

.

.

Answer the following questions regarding project scheduling.

Using the Gantt Chart you created insert the dates for the following:

Wall Frame and Roof Trusses

Windows

Pre order for Kitchen Cupboards requiring 6 weeks notice.

Fill in the Gantt Chart provided with the tasks list created to and enter viable Start Dates, End Dates and Task Duration in Days and Variations. Ensure that this is uploaded with your Assessment.

Answer

While digging footings, blue stone rock was hit increasing the cost of footing excavation by $5000.00 more than allowed for in the Provisional Sum and delaying the project by four (4) days.

You are to briefly describe the effect of the delay to your construction schedule in fifty to one hundred (50-100) words.

Answer

On the morning of the day the roof lining was to be installed the project site receives seven days, (one (1) week) of rain.

Update your Gantt Chart to reflect this delay and explain the effect on the project i.e., which tasks will be delayed and the what the new finish date will be.

Answer

The client decides to change their kitchen cabinet to a more expensive option. This will increase the cost of the cabinets and the install time frame of the new kitchen.

Briefly describe the effect of the delay to your construction schedule in fifty to one hundred (50-100) words.

Answer

Access and review the following documents from your organisation:

Policies and procedures relevant to material resources

Policies and procedures relevant to human resources

Based on the documents you reviewed, answer the following questions.

After completing the task, submit the policies and procedures that you accessed and reviewed to your assessor.

Outline your organisations material purchasing policy.

Answer

Outline your organisations material purchasing procedure.

Answer

Outline your organisations Contractor Engagement policy.

Answer

Outline your organisations Contractor Engagement procedure.

Answer

Outline your organisations Contractor Communication policy.

Answer

Outline your organisations Contractor Communication procedure.

Answer

Access and review the following documents from your organization:

HR Health and Safety Policy

HR Health and Safety Procedures

Based on the documents you reviewed, answer the following questions.

Outline your organizations HR Health and safety Policy requirements.

Answer

Outline your organizations HR Health and safety Procedure.

Answer

Assessment Title Assessment 1 Knowledge Questions

Unit Code and Title CPCCBC4005 Produce labour and material schedules for ordering

Qualification Code and Title CPC40120 Certificate IV in Building and Construction (Builder)

CPC40320 Certificate IV in Building Project Support (Estimator)

CPC50220 Diploma of Building and Construction (Building)

Business Unit / Workgroup Future Industry & Trade / ABS

Instructions

Method of Assessment Written Assessment

Overview of Assessment The Knowledge Assessment is a set of questions testing your general knowledge and understanding of the general theory behind this unit.

Task/s to be Assessed You must answer all the Fourteen (14) Knowledge Assessment Questions using your own words unless instructed otherwise.

You may reference the Learner Guide and other relevant resources and learning materials to complete this assessment.

You are to answer the questions based on processes that should be implemented in a typical workplace setting.

Time Allowed You are required to submit this assessment by the due date which is published on Learn. Submissions may be sent earlier than stated due dates.

Location of Assessment Assessment outlines and resources will be available via LEARN (online classroom) and you will work in a simulated workplace environment on or off campus.

A simulated workplace environment may consist of, but not be limited to an area of a commercial or residential room which may contain:

Workstation set to an appropriate ergonomic height and accompanying chair,

Desk top computer or laptop

Reliable internet access

Landline telephone or mobile phone

Appropriate lighting

Industry reference material

Decision Making Rules To achieve a Satisfactory outcome, you must satisfy all assessment criteria and evidence requirements as stated in the assessment instructions.

Application for Extension

No late submissions will be accepted without prior Application for Extension form filled out before the due date, with new completion date and time with written Lecturer approval.

TAFE SA requires supporting documentation for this application to be processed (see TAFE SA policy of accepted supporting documentation).

Assessment Conditions This assessment is unsupervised. It may be conducted in a simulated workplace environment (in a classroom on campus) or in a blended environment (online) via Learn.

You are required to work independently on this assessment.

You are encouraged to contact your Lecturer if you encounter any access issues or if you are unsure of written directions.

Your Lecturer may clarify questions or help with interpretation and cannot provide answers. Your Lecturer may also aid with contextualising terminology and definitions if needed.

All work submitted must be your own work.

Once you have completed the assessment, you must then submit all completed tasks via the allocated Submission Portal on Learn.

Academic Misconduct (Plagiarism or Cheating)You must ensure that the work you submit is your own and / or acknowledge the work of others by referencing the authors appropriately.

Where Academic Misconduct occurs, for minor breaches students may be required to undertake an additional assessment to provide evidence of attaining the requirements of the component of study; or if it is a serious or deliberate offence, a student will fail the assessment.

Reasonable AdjustmentOpportunity for reasonable adjustment to be provided in accordance with students Disability Access Plan (DAP). Adjustment must not undermine the integrity of the assessment process or assessment criteria.

Depending on the learning difficulty of the student, reasonable adjustments for this assessment may include:

Allowing extra time in the assessment task

Verbal answering of questions instead of writing

Special Considerations based adjustments are due to individual circumstances affecting the students ability to undertake the assessment. Details of the meaning of Special Consideration can be found in the Assessment and Academic Grievances Policy.

Refer to Learn site for Application for Extension.

Resources Required Resources that YOU require for this assessment include:

Desktop computer or laptop

Reliable internet access

Access to Word and PowerPoint

Printer / photocopier / scanner

If you are unable to access these resources then you must use the campus facilities to complete your assessment.

Your Assessor will provide you with the following via the Learn platform:

Access to Learn site CPCCBC4005 Produce labour and material schedules for ordering,

Learner Guide - CPCCBC4005 Produce labour and material schedules for ordering,

CPCCBC4005 ASI - Student Instructions Assessment 1.docx

Resources

To complete this assessment, you the assessor will provide the students with access to the following Resources:

Computer with Internet, email access, and a working web browser

Installed software: MS Word, Adobe Acrobat Reader

Relevant government building and construction legislation,

Current building and construction codes and standardsResult Notification and Reassessment Information Your Lecturer will mark your submission within two (2) weeks of you submitting your answers to the questions. You will receive your feedback and your result via Learn.

Feedback is to be given whether the submission is Satisfactory or not and will outline what result you have achieved and what responses to the questions, if any, need improvement.

To receive a Satisfactory outcome for this assessment you must have submitted your assessment before your given due date.

Reassessment or re submission information will be provided by your assessor and will be required to be addressed within two (2) weeks after receiving feedback.

If your assessment is deemed Unsatisfactory you are allowed one (1) re-submission to be completed within the negotiated time organised with the Lecturer.

ASSESSMENT ONE

Knowledge Questions

In this Assessment students are to provide responses to the following Fourteen (14) Questions related to CPCCBC4005 Produce labour and material schedules for ordering.

Answer the following questions about legislation applicable to building and construction.

What are the South Australian planning and development Legislations / Acts that apply to the building and construction industry?

Answer

.

There are several other acts and regulations that apply to specific parts of the building and construction industry in South Australia.

.

.

.

According to the Independent Contractors Act 2006, what are three (3) grounds that can be used to decide if a services contract is unfair?

Independent Contractors Act 2006 (legislation.gov.au) (Part 2(9))

https://www.legislation.gov.au/Details/C2021C00495Answer

.

.

.

Answer the following questions about government codes applicable to building and construction projects.

General User | NCC (abcb.gov.au)https://ncc.abcb.gov.au/homeowners What is the name of the government body that oversees developing the NCC?

Answer

In what different areas do the NCC Volume 1, NCC Volume 2, and NCC Volume 3 apply to?

NCC Volume 1

Answer

NCC Volume 2

Answer

NCC Volume 3

Answer

What is the exact title of one (1) of South Australias construction code of practice?

Answer

When were the South Australian Codes of Practice last published?

Codes of Practice | SafeWork SAhttps://www.safework.sa.gov.au/resources/codes-of-practiceAnswer

Answer the following questions about construction drawings and specifications.

What is a construction drawing?

Answer

What is a specification?

Answer

Answer the following questions about contractor and supplier contracts.

What is a Building Contract?

Answer

What information does a Supplier Contract contain?

Answer

.

.

.

.

.

Why is it important to for building and construction projects to have Supplier Contracts?

Answer

.

.

.

.

.

.

.

.

Answer the following questions about building applications.

Outline the building application stages in South Australia.

Stages and timeframes | PlanSAhttps://plan.sa.gov.au/development_applications/getting_approval/how_applications_are_assessed/assessment_stagesAnswer

.

.

.

.

.

.

.

.

Briefly explain what can be done if a planning development application is not approved.

Answer

Answer the following questions about labour in the building and construction industry.

6.1 Briefly describe each type of employee found in the building and construction industry:

Daily hire employee

Answer

Full-time weekly hire employee

Answer

6.1.3 Part-time weekly hire employee

Answer

6.1.4 Casual employee

Answer

Identify ten (10) minimum employment standards included in the National Employment Standards (NES).

National Employment Standards - Fair Work Ombudsmanhttps://www.fairwork.gov.au/employment-conditions/national-employment-standardsAnswer

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

Access and review the Building and Construction General On-site Award [MA000020] and answer the following question:

Building and Construction General On-site Award [MA000020] - Fair Work Ombudsmanhttps://www.fairwork.gov.au/employment-conditions/awards/awards-summary/ma000020-summaryWhat is this document for?

Answer

What is one (1) reason subcontractors are usually used in the building and construction industry? Briefly explain your answer.

Answer

Answer the following questions about organisational overheads.

What is an overhead expense?

Answer

.

.

.

.

.

Identify three (3) examples of overhead expenses that are common in the building and construction industry.

Answer

.

.

.

Answer the following questions about indemnity insurance commonly used in the building and construction industry.

What is public liability insurance in the context of building and construction?

Answer

Provide one (1) example of an instance that would be covered by the building and construction projects public liability insurance.

Answer

What is professional indemnity insurance in the context of building and construction?

Answer

Answer the following questions about temporary electrical, plumbing and draining services on a building and construction site.

Provide one (1) example of why building and construction sites require temporary electrical services.

Answer

For a building and construction site with thirty (30) male workers and fifteen (15) female workers, how many closet pans and urinals are required?

Construction work toilet facilities | SafeWork SAhttps://www.safework.sa.gov.au/industry/construction/toilet-facilities#:~:text=Workers%20should%20have%20access%20to,as%20possible%20to%20the%20workplaceAnswer

.

.

.

Why is it important to have proper drainage services installed on a building and construction site?

Answer

Answer the following questions about temporary site facilities, storage facilities and boundary fencing.

Identify three (3) factors that you must consider when coming up with a layout for the building and construction project site.

Answer

.

.

.

Identify three (3) factors that influence on-site storage facility requirements.

Answer

.

.

.

Why should building and construction sites have boundary fences surrounding them?

Answer

.

.

.

10.4 What are factors to consider when determining the suitability of the type of fence used on a building and construction site?

Security of workplaces in South Australia (hia.com.au)https://hia.com.au/resources-and-advice/managing-your-safety/safety-rules/articles/security-of-workplacesAnswer

.

.

.

.

.

Answer the following questions about communication on the building and construction site.

Identify three (3) different methods of communication on a building and construction site.

Answer

.

.

.

Answer the following questions about project administration in building and construction.

What are five (5) responsibilities of a project administrator?

Answer

.

.

.

.

.

What are the seven (7) stages of a building and construction project?

Answer

.

.

.

.

.

.

How often must construction project managers renew their ABLIS (Australian Business Licence and Information Service) licence?

Answer

Answer the following questions about workplace safety requirements in the building and construction industry.

Workers' compensation | Safe Work Australiahttps://www.safeworkaustralia.gov.au/workers-compensationWhat is workers compensation?

Answer

Who is required to provide workers compensation?

Answer

What is the exact title of the WHS regulations applicable in South Australia?

Answer

Who is legally obliged to report a notifiable WHS workplace incident?

Answer

To which government department is a notifiable WHS workplace incident reported?

Answer

According to the WHS regulations applicable in South Australia, when should a safe work method statement (SWMS) for high-risk construction work be prepared?

SWMS for high risk construction work | SafeWork SAhttps://www.safework.sa.gov.au/industry/construction/safe-work-method-statementsAnswer

Outline the minimum information that should be included in the SWMS, according to the WHS regulations applicable in South Australia.

(SWMS for high risk construction work | SafeWork SA)

https://www.safework.sa.gov.au/industry/construction/safe-work-method-statementsAnswer

.

.

.

.

.

.

.

.

.

.

Identify three (3) activities covered by high-risk construction work that must be included in a SWMS if carried out.

SWMS for high risk construction work | SafeWork SAhttps://www.safework.sa.gov.au/industry/construction/safe-work-method-statementsAnswer

.

.

.

Answer the following questions about environmental management.

Who is the authority or regulatory body overseeing environmental management in South Australia?

Answer

What is an environmental management plan (EMP) in the context of building and construction?

Answer

Checklist

Knowledge Questions YES NO

Question 1

Question 2

Question 3

Question 4

Question 5

Question 6

Question 7

Question 8

Question 9

Question 10

Question 11

Question 12

Question 13

Question 14