Air-conditioning and Refrigeration Assignment

UEENEEC025B Participate in refrigeration and air conditioning work and competency development activities

1. When you consider WHS what PPE should you consider?
2. Discuss what is expected for Fire and Emergencies on a particular site.

UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace

1. What are the basic legal requirements covering occupational health and safety in the workplace?
2. Discuss the workplace requirements for handling chemicals.

UEENEEE102A Fabricate, assemble and dismantle utility industry components

1. What considerations do you consider when measuring and marking out?
2. Discuss the use of sheet metal work in Electrotechnology.

UEENEEE103A Solve problems in ELV single-path circuits

1. What do you consider to be basic electrical concepts?
2. Discuss EMF sources energy sources and conversion of electrical energy.

UEENEEE105A Fix and secure electrotechnology equipment

1. What type of accessories for supporting, fixing and protecting wiring /cabling /piping and functional accessories to hollow walls?
2. What type of accessories for supporting, fixing and protecting wiring/cabling/piping and functional accessories to solid walls?

UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications

1. What information do you expect to find on an Architectural drawing?
2. Discuss the information that you would find on an Electrical drawing.

UEENEEE137A Document and apply measures to control OHS risks associated with electrotechnology work

1. What do you consider to be Hazards and risks and control measures associated with high-voltage?
2. Discuss the Hazards and risks and control measures in working with low voltage equipment.

UEENEEJ102A Prepare and connect refrigerant tubing and fittings

1. What is considered to be piping for refrigerant tubing and fittings techniques?
2. Discuss the methods of joining refrigerant tubing and fittings techniques.

UEENEEJ103A Establish the basic operating conditions of vapour compression systems

1. What refrigerant conditions do you consider to be basic operating conditions of vapour compression systems?
2. Discuss temperature and relative humidity about operating conditions of vapour compression systems

UEENEEJ104A Establish the basic operating conditions of air conditioning systems

1. What are the basic air conditioning operating conditions with consideration to temperature & relative humidity measuring devices?
2. Discuss the sources of heat associated with basic air conditioning operating conditions.

UEENEEJ106A Install refrigerant pipe work, flow controls and accessories

1. What are environmental and building regulations, flow controls and accessories?
2. Discuss what you consider to be refrigerant pipework

UEENEEJ107A Install air conditioning and refrigeration systems, major components and associated equipment

1. What are the cool room and freezer room systems installation requirements and procedures?
2. Discuss residential air conditioning systems installation requirements and procedures.

UEENEEJ108A Recover, pressure test, evacuate, charge and leak test refrigerants

1. What are the properties of refrigerants and how do you ensure the safe handling of refrigerants?
2. Discuss how you recover, pressure test, evacuate, charge and leak test refrigerants

UEENEEJ109A Verify functionality and compliance of refrigeration and air conditioning installations.

1. What electrical safe working practices must be considered when conducting functionality testing for refrigeration and air conditioning installation?
2. Discuss the testing and verification methods for refrigeration and air conditioning installations

UEENEEJ110A Select refrigerant piping, accessories and associated controls

1. What drawings, specifications, regulations & codes do you require to conduct refrigerant pipe/tube, accessories and associated controls selection?
2. Discuss the selection of refrigerant pipe/tube, accessories and associated controls selection

UEENEEJ111A Diagnose and rectify faults in air conditioning and refrigeration systems and components

1. What could be considered normal and abnormal system and component operations in refrigeration and air conditioning systems fault diagnosis and repair?
2. Discuss a process for finding and rectifying system faults

UEENEEJ113A Commission air conditioning and refrigeration systems

1. What should be considered for commissioning procedures and requirements for compressor operation and performance with refrigeration and air conditioning?
2. Discuss the testing, measurements and adjustments of the system.

UEENEEJ153A Find and rectify faults in motors and associated controls in refrigeration and air conditioning systems

1. What is Capacitor and shaded pole, single phase motor and starters regarding refrigeration and air conditioning motors and associated controls?
2. Discuss split phase, single phase motors and starters about refrigeration and air conditioning motors and associated controls.

UEENEEJ170A Diagnose and rectify faults in air conditioning and refrigeration control systems

1. What do you consider to be the components of a refrigeration and air conditioning system electrical/electronic controls system?
2. Discuss the considerations for refrigeration and air conditioning direct digital controls.

UEENEEJ194A Solve problems in low voltage refrigeration circuits

1. What are the considerations for direct current series / parallel circuits in low voltage refrigeration circuits?
2. Discuss the voltage and current measurement.

UEENEEK142A Apply environmentally and sustainable procedures in the energy sector

1. What do you consider sustainable work practices environmentally sustainable work practice?
2. Discuss techniques for reducing carbon-produced energy and hence greenhouse gases.

UEENEEP012A Disconnect / reconnect composite appliances connected to low voltage installation wiring

1. What do you consider to be basic electrical principles about electrical safety principles?
2. Discuss the components of a basic electrical diagram.

UEENEEP017A Locate and rectify faults in low-voltage composite appliances using set procedures

1. What would you look for in single and three-phase composite equipment to fault-find electrical composite appliances/fault-find electrical composite equipment?
2. Discuss how you produce documentation and report encompassing.

UEENEEP024A Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply

1. What are the relationships in an electrical circuit?
2. Discuss the requirements that apply for the selection of flexible cords and plugs to suit given applications.

UEENEEP025A Attach cords, cables and plugs to electrical equipment for connection to 1000 Va.c. or 1500 Vd.c. supply

1. What must be considered when selecting flexible cords/cables and plugs to 1000V to suit given applications?
2. Discuss the detail that is required to produce documentation for flexible cords/cables and plugs to 1000 V.

UEENEEC001B Maintain documentation

1. What information should be included in the quotation to the Customer?
2. What is the benefit of recording all JSA electronically?
3. Describe how you would enter data in a spreadsheet.

UEENEEJ167A Resolve problems in central plant air conditioning systems

1. Describe the procedures for preparation/resolving problems/completing the task

This Engineering Assignment has been solved by our Engineering Expert at Exam Question Bank. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+ Students in Australia, UK & US by helping them to score HD in their academics. Our Experts are well-trained to follow all marking rubrics & referencing Styles. Be it a used or new solution, the quality of the work submitted by our assignment experts remains unhampered. You may continue to expect the same or even better quality with the used and new assignment solution files respectively. There’s one thing to be noticed you could choose one between the two and acquire an HD either way. You could choose a new assignment solution file to get yourself an exclusive, plagiarism (with free Turn tin file), expert quality assignment or order an old solution file that was considered worthy of the highest distinction.