Learner Name: SARBJIT SINGH
Learner Name: SARBJIT SINGH
Date of Birth: 15-05-1980
Unique Learner Number (ULN): 200687
Centre Name: Skills Learning UK Ltd
IQA Name:
Tutor/Assessor Name:
Qualification
Title Proqual Level 2 NVQ Diploma in Specialist Concrete Operations Pathway 2 - In Situ Flooring - Concrete Finisher
Ofqual Qualification No. 601/6795/6
Assessment Summary
(for tutor/assessor use only)
In order for learners to be assessed as successful, they are required to achieve the minimum standard for each learning outcome below:
A UNIT A/503/1170- Conforming to General Health, Safety and Welfare in the Workplace
B UNIT J/503/1169- Conforming to Productive working practices in the workplace.
C UNIT F/503/1171- Moving, Handling and Storing Resources in the workplace
D UNIT T/503/9560- Establishing Work Area Protection and Safety in the Workplace
E UNIT T/600/7007- Preparing Areas For Concrete Flooring in the Workplace
F UNIT F/600/7012- Applying Surface Finishes to Concrete Flooring in the Workplace
LEARNER DECLARATIONS:
I confirm that the work contained in this assessment workbook is my own work.
Learner Signature: ASSESSOR/TUTOR DECLARATIONS:
I confirm I have read and abided by the assessment requirements of this qualification when assessing the learners work and have checked the learners identification.
Assessor/Tutor Signature: Qualification Result:
PASS: REFER: IQA SIGNATURE UNIT A
Unit A/503/1170
Conforming to General Health, Safety and Welfare in the Workplace.
Learning Outcome: The learner will: Assessment Criterion: The Learner can:
1. Comply with all workplace health, safety and welfare legislation requirements. 1.4 State why and when health and safety control equipment, identified by the principles of protection, should be used relating to types, purpose and limitations of each type, the work situation, occupational use and the general work environment, in relation to:
collective protective measures
personal protective equipment (PPE)
respiratory protective equipment (RPE)
local exhaust ventilation (LEV).
Collective measures protect everyone on site affected by a particular hazard while PPE only protects the person wearing. The collective measures is better and more reliable. RPE is an example of PPE that protect the lungs from construction dusts and fumes and many more hazards. The LEV is used to control dust or fumes from the source. This is highly recommended by the health and safety executive.
1.5 State how the health and safety control equipment
relevant to the work should be used in accordance with the given instructions.
Training is one key thing to ensure I am aware of the hazards and the risks from using any equipment. Also when I get to site induction is compulsory to familiarize with the site rules and then briefing on the risk assessment and method statement. I also know the procedures for reporting any issues on site and my point
of contact will be my supervisor or line manager.
1.6 State which types of health, safety and welfare
legislation, notices and warning signs are relevant to the occupational area and associated equipment.
There are mainly 5 types which include Warning signage for hazards
Prohibition signage to stop unauthorized access Emergency / fire exit signage etc.
Blue mandatory signage
Fire fighting equipment signage
1.7 State why health, safety and welfare legislation,
notices and warning signs are relevant to the
occupational area.
This is very good on site. Safety signage draws operatives attention to the potential hazards and precautions necessary to reduce any risk of incident. Safety signage specifying PPE requirement, They all have different functions such as Warning signage for hazards, Prohibition signage to stop unauthorized access, Emergency / fire exit signage etc.
Blue mandatory signage, Fire fighting equipment signage
1.8 State how to comply with control measures that
have been identified by risk assessments and safe systems of work.
It is very important to carryout adequate briefing on the RAMS and supervision of the works on site is also useful to ensure site activities and ensure the control measures are complied with. I sign to RAMS before starting any
new works
2. Recognise hazards associated with the workplace that have not been previously controlled and report them in accordance with organisational procedures. 2.2 List typical hazards associated with the work environment and occupational area in relation to resources, substances, asbestos, equipment,
obstructions, storage, services and work activities.
Crush injuries
Dust from construction works Asbestos fibres
Noise from using heavy construction equipment Slips, trips and trips.
Poor storage of materials Underground and overhead services:
Striking live services during digging or crane activities Concrete spill during site works .
Lack of supervision
2.3 List the current Health and Safety Executive top ten
safety risks.
Work at Height, Electricity, Moving object, slips trips and falls, collapse of structures, electricity, demolition, severing, impact, ejection of fluid and abrasion,
2.4 List the current Health and Safety Executive top five
health risks.
Stress, Mental health, noise, silica dust and hazardous substances, manual handling,
Candidates name SarbjitSingh
Candidates signature DATE Units knowledge criteria achieved? YES NO Comments
Assessors name Assessors signature DATE 2.5 State how changing circumstances within the
workplace could cause hazards.
If there is changes to work and am not made aware of that changes made to RAMS or the work, this means I will not be aware of the new control measures and this
can put me at risks or exposure to additional hazards.
2.6 State the methods used for reporting changed
circumstances, hazards and incidents in the workplace.
It is important to updated the RAMS, Carryout toolbox talks,
site meetings can also be useful to discuss changes, Daily briefings is also very good
3. Comply with organisational policies and procedures to contribute to health, safety and welfare. 3.6 State the organisational policies and procedures for health, safety and welfare, in relation to:
dealing with accidents and emergencies associated with the work and environment
methods of receiving or sourcing information
reporting
stopping work
evacuation
fire risks and safe exit procedures
consultation and feedback.
If any issue arise at work, I will stop works immediately and let my supervisors know what the issue is and let him advise what I need to do.
fire exit signs are placed around site throughout the site and employee are aware of fire exits and plans for each building in case of a fire.
In the event of emergencies, the steps are to - stop work and move to a place of safety and then contact site supervisor immediately, everyone has a responsibility to report any accidents or near miss or unsafe conditions or unsafe acts, safety is everyones .
If the alarm go off everyone must stop work immediately. Evacuate the site and go to the nearest fire assembly. I can only come back to the building when am authorised to do so
3.7 State the appropriate types of fire extinguishers
relevant to the work.
CO2 which extinguishes by taking away oxygen, Wet chemicals, Water and Foam which extinguishes fire by taking away the heat. Dry powder with blue band in the middle
3.8 State how and when the different types of fire
extinguishers are used in accordance with legislation and official guidance.
Before using this equipment, make sure it is safe to do so. Extinguishers are used by releasing the pin if it has one to set it off, point at fire and press on the handle. Make sure not to endanger yourself or colleagues.
Dry powder suits combustible metal fire, Water suits textiles, wood, paper, etc. Wet chemicals suits cooking fats, Co2 suits electrical fire and foam are suitable for most.
4. Work responsibly to contribute to workplace health, safety and welfare whilst carrying out work in the relevant occupational area. 4.2 State how personal behaviour demonstrates responsibility for general workplace health, safety and welfare, in relation to:
recognising when to stop work in the face of serious and imminent danger to self and/or others
contributing to discussions and providing feedback
reporting changed circumstances and incidents in the workplace
complying with the environmental
requirements of the workplace.
When PPE is not used correctly Removing scaffold edge protection Working from ladder incorrectly Pouring concrete into drain
5. Comply with and support all organisational security arrangements and approved procedures. 5.2 State how security arrangements are implemented
in relation to the workplace, the general public, site personnel and resources.
First all tools are returned to the office or storage each day Keep tools away and ensure they are locked up where it is safe. Also, part of the security process is to sign in and out each day. This will help to know who is on site and how
many people incase something happens
Candidates name SarbjitSingh
Candidates signature DATE Units knowledge criteria achieved? YES NO Comments
Assessors name Assessors signature DATE UNIT B
Unit J/503/1169
Conforming to Productive Working Practices in the Workplace.
Learning Outcome: The learner will: Assessment Criterion: The Learner can:
1. Communicate with others to establish productive work practices. 1.2 Describe the different methods of communicating with line management, colleagues and customers.
Meeting with others face to face like our daily briefing, if urgent I call my supervisor on telephone to give instruction, email and by completion of forms where applicable in line with company procedure.
Customers should always be communicated with politely and listened to ensuring their needs are understood. For customers through posters, dibond on hoarding, posters and phone calls depending on the situations
1.3 Describe how to use different methods of communication to ensure that the work carried out
is productive.
Toolbox talks is once a week, daily prestart briefing where tasks and safety are discussed. Works delegated to various operatives and teams according to their capability and competency. Other means could be through DABS where there are numerous contractors on site. And sometimes through the logistics meetings
2. Follow organisational procedures to plan the sequence of work. 2.3 Describe how organisational procedures are applied to ensure work is planned and carried out productively, in relation to:
using resources for own and others work requirements
allocating appropriate work to employees
organising the work sequence
reducing carbon emissions.
In my employment, my supervisors and managers usually allocate work to myself and colleagues. They should understand employees knowledge and skill to ensure work is allocated appropriately. If more operatives are required, this should be communicated to foreman and organised. Waste should be minimised by only ordering necessary materials and not having delays or causing any issues
2.4 Describe how to contribute to zero/low carbon work
outcomes within the built environment.
This is about helping the environment and make sure resources are being utilized correctly and Reuse materials where possible. It is also about reducing waste. Also printing should be reduced in the office, reduce waste of concrete by ordering the right quantity.
3. Maintain relevant records in accordance with the organisational procedures. 3.2 Describe how to complete and maintain documentation in accordance with organisational procedures, in relation to:
job cards
worksheets
material/resource lists
time sheets.
Job Cards: Fill out job cards accurately and comprehensively, including details like task description, materials used, and labor hours. Ensure all relevant information is captured to provide a clear record of the work done.
Worksheets. Complete worksheets promptly, Documenting progress, measurements and any change in the plans. Clear language to tell the task and note any challenges faced during the process.
Material and Resource lists: It maintains an updated list of materials and resources used in the project. Keep track of quantities, costs, and any changes or substitutions made. Regularly review and update the list to ensure accuracy.
Time Sheets: Fill out time sheets daily, recording the hours worked by each team member. Include breaks, overtime, and any additional notes related to attendance or work conditions. Ensure timely submission of time sheets for efficient payroll processing.
3.3 Explain the reasons for ensuring documentation is
completed clearly and within given timescales.
Papers should be completed accurately and within set timescales to ensure the job runs smoothly, safely and information passed on accordingly. The site manager should be aware of progress and any issues. A lack of or inaccurate information may result to delay or cause
safety risks in the work place
4. Maintain good working relationships when conforming to productive working practices. 4.3 Describe how to maintain good working relationships,
in relation to:
individuals
customer and operative
operative and line management
own and other occupations.
It is good for every employee to look after their safety and that of others who maybe affected by their works. site meetings, toolbox talk to discuss any issues affecting the health and safety of the operatives. Regular site updates will create good teamwork as everyone clear of expectations. Understanding each others skills within professions, helps maintain good working relationships. Being nice to others and support them where possible
4.4 Describe why it is important to work effectively with
line management, colleagues and customers.
To do all things right, it is very important to work with line managers, Collegues and customers. In this way all the work will be completed in time, we will able to make everyone satisfied and happy. When there is disorganisations, there will be number of problems so it is very important to work smoothly, communitcate effectively and staying organised. In this way we can avaiod any unnecessary problem and ensure the sucess of every one.
4.5 Describe how working relationships could have an
effect on productive working.
This can affect how much works get done purely by a lack of the team spirit. Working relationships have an impact
on productivity as poor relationships can hinder progress. Cause slow working, inaccurate completion of jobs and unhappy customers. Leads to poor communication amongst employees and could cause accidents in the work place.
4.6 Describe how to apply principles of equality and
diversity when communicating and working with
others.
Principles of equality and diversity means showing respect to people in every way possible. No disregard, no inequality, no discrimination on the grounds of color, age or sexually or belief
Candidates name SarbjitSingh
Candidates signature DATE Units knowledge criteria achieved? YES NO Comments
Assessors name Assessors signature DATE UNIT C
Unit F/503/1171
Moving, Handling and Storing Resources in the Workplace.
Learning Outcome: The learner will: Assessment Criterion: The Learner can:
1. Comply with given information when moving, handling and/or storing resources. 1.3 Describe the different types of technical, product
and regulatory information, their source and how they are interpreted.
Some of the technical information I use on site include data sheet which identify the hazards and risks associated with using a substance and the control measures. Manufacturer data sheets also carry similar information and the instructions on using an item of equipment. This information lets the user know of anything specific to ensure safe use, moving and storage of product. RAMS also provided added information for
my works
1.4 State the organisational procedures developed to report and rectify inappropriate information and unsuitable resources and how they are
implemented.
I know this from my site induction Contacting site supervisor or line managers, toolbox talk events for sharing information which also present operatives the opportunity to report issues, accident book. This could also be communicated via email, telephone. If am unsure I go to supervisor for anything
1.5 Describe how to obtain information relating to using
and storing lifting aids and equipment.
Information related to using and storing lifting aids
usually come in the form of a manual for the equipment. This is often attached to the equipment or stored in
office; If it is not there I can request it from my
supervisors
2. Know how to comply with relevant legislation and official guidance when moving, handling and/or storing resources 2.1 Describe their responsibilities under current legislation and official guidance whilst working:
in the workplace, in confined spaces, below ground level, at height, with tools and equipment, with materials and substances, with movement/storage of
materials and by manual handling and mechanical
lifting.
It is my responsibility to look after myself in the work place and that of others who may be affected by my acts or omission. In the confined spaces, suitable access and egress must be in place, emergency procedures and operatives trained and follow site rules
Under ground level, i must use PPE and have suitable mask depending on the work locations and work according to RAMS
Training is important when using working at height equipment. use any tools according to the instruction from the manufacturer. Movement and storage of materials is also managed by correct manual handling and safe storage guidelines and following manual handling assessment.
2.2 Describe the organisational security procedures for tools, equipment and personal belongings in relation
to site, workplace, company and operative.
All personal belongings should be stored safely and locked in secured boxes. Sign in and out whenever I am on site. Site security should be employed if risks remain at night or surveillance camera put on display. All tools should be stored safely and securely when not in use with lockable boxes available.
2.3 Explain what the accident reporting procedures are
and who is responsible for making the reports.
I follow the instruction received at the point of induction. If injuries occur, the onsite first aider will be required to administer first aid. If serious injury ambulance or attendance at A&E may be required. Serious injuries must be investigated by the site manager or the company safety advisor.
2.4 State the appropriate types of fire extinguishers
relevant to the work.
CO2 which extinguishes by taking away oxygen, Wet chemicals, Water and Foam which extinguishes fire by taking away the heat. Dry powder with blue band in the
middle
2.5 Describe how and when the different types of fire extinguishers, relevant to the given occupation, are
used in accordance with legislation and official
guidance.
Before using this equipment, make sure it is safe to do so. Extinguishers are used by releasing the pin if it has one to set it off, point at fire and press on the handle. Make sure not to endanger yourself or colleagues.
Dry powder suits combustible metal fire, Water suits textiles, wood, paper, etc. Wet chemicals suits cooking fats, Co2 suits electrical fire and foam are suitable for most.
3. Maintain safe working practices when moving, handling and/or storing resources. 3.4 Explain why and when health and safety control equipment, identified by the principles of protection,
should be used, relating to moving, handling and/or storing resources, and the types, purpose and limitations of each type, the work situation, occupational use and the general work environment, in relation to:
collective protective measures
personal protective equipment (PPE)
respiratory protective equipment (RPE)
local exhaust ventilation (LEV).
Collective measures, like installing edge protection, are essential to safeguard all workers on a construction site, rather than relying solely on individual protection like harnesses. This should be the primary approach in any situation. However, it still depends on the responsible behavior of the workers.
Personal Protective Equipment (PPE) only shields the individual wearing it and should only be used as a last resort when other measures are not feasible. Respiratory Protective Equipment (RPE) is crucial for safeguarding lungs against construction dust and fumes, provided it is correctly selected and worn properly. Proper training and maintenance of all PPE and RPE are essential for their effectiveness.
Local Exhaust Ventilation (LEV) systems can either extract air or provide fresh air depending on the equipment's purpose. It should be prioritized as a control measure on construction sites.
3.5 Describe how the health and safety control equipment relevant to the work should be used in
accordance with the given instructions.
It is very important that all the workers must be trained in using the equipment to understand the hazards and risks associated with the misuse. All the new workers to site should be inducted and given tool box talks on the safe use of equipment.
If unsure how to operate an item of equipment or any damage, workers should be advised to tell their supervisor Any query or incident in the work place should be reported to site supervisor. There is a need of communication and reporting to supervisor to assist in maintian a safe working environment for everyone.
3.6 State how emergencies should be responded to in accordance with organisational authorisation and personal skills when involved with fires, spillages,
injuries and other task-related hazards.
If accident occurs at work inform first aider. If serious injury stay with injured party and ring ambulance or get colleague to do so. All accidents should be reported in accident/ incident book. Ensure supervisors are notified and the incident is recorded accordingly
4. Select the required quantity and quality of resources for the methods of work to move, handle and/or store occupational resources. 4.2 Describe the characteristics, quality, uses, sustainability, limitations and defects associated with
the occupational resources in relation to:
lifting and handling aids
container(s)
fixing, holding and securing systems.
These should be maintained to keep workable standard. All the liifting of heavy material should be carried out with lifting aids that meets the safe working load capacity. Manufacturing instructions must be followed. If any defects found do not use
Metallic materials, strong durable quality, storage of materials/tools for security and safety. Long lasting, material reusable. Fixings Wall ties, retainers, screws fixing inner and outer walls
4.3 Describe how the resources should be handled and how any problems associated with the resources are
reported.
Any resources should be used according to manufacturers instructions. With any problems reported to site manager and provider of resources depending on the company procedures
4.4 Explain why the organisational procedures have been developed and how they are used for the
selection of required resources.
To manage materials effectively, preventing issues like theft, excessive ordering and overstocking organisational procedures are there. It also help to maintain the productivity and avoiding delays. We can ensure smooth operations and prevent any unnecessary interruptions that can impact work progress.
4.5 Describe any potential hazards associated with the
resources and methods of work.
Injury resulting from misuse of tool, slips, trips and falls from risks on site, manual handling injuries through incorrect manual handling. There is a potential of exposure to hazardous substances capable of causing dermatitis, skin irritation and asthma.
5. Prevent the risk of damage to occupational resources and surrounding environment when moving, handling and/or storing resources. 5.4 Describe how to protect work from damage and the purpose of protection in relation to general workplace activities, other occupations and adverse
weather conditions.
In the winter we cover the concrete after pouring the slab with frost blanket. And in the warm weather we just put barriers in the right places to prevent unauthorized persons.
5.5 Explain why the disposal of waste should be carried out safely in accordance with environmental responsibilities, organisational procedures, manufacturers information, statutory regulations
and official guidance.
Disposal of waste should be carried out only by authorized and licensed waste carrier. Suitable skips for
transporting materials and reduce waste where possible.
6. Complete the work within the allocated time when moving, handling and/or storing resources. 6.2 State the purpose of the work programme and explain why deadlines should be kept in relation to:
progress charts, timetables and estimated times
organisational procedures for reporting
circumstances which will affect the work programme.
The programme make details available. The building contractor has a contractual obligation to provide these charts. If there is no progress plan it would be difficult to manage the work as no one would understand the scheduling of events to ensure completion.
7. Comply with the given occupational resource information to move, handle and/or store resources to the required guidance. 7.3 Describe how to apply safe work practices, follow procedures, report problems and establish the authority needed to rectify them when moving,
handling and/or storing occupational resources.
In order to work safely first read and understand the RAMS. Any issue during work, stop and immediately speak to the line supervisor or manager. Handling of all resources must be carried out in a way that does not put any one at risk. Avoid heavy lifting by all means where it is possible
7.4 Describe the needs of other occupations when
moving, handling and/or storing resources.
If materials are not stored in good manner on site, it can pose a serious risk to other trade contractors which could result to accidents from slips, trips or falls, manual handling to move materials causing obstructions. This
can also result to some serious incidents
Candidates name SarbjitSingh
Candidates signature DATE Units knowledge criteria achieved? YES NO Comments
Assessors name Assessors signature DATE UNIT D
Unit T/503/9560
Establishing Work Area Protection and Safety in the Workplace
Learning Outcome: The learner will: Assessment Criterion: The Learner can:
1. Interpret the given information relating to the work and resources when establishing work area protection and safety. 1.3 Describe the organisational procedures developed to report and rectify inappropriate information and unsuitable resources and how they are
implemented.
I will inform my supervisor, who would then refer to site
manager for the appropriate information and any
correction that needs to be effected. I would then wait instruction on how to proceed at the earliest opportunity. In the absence of the correct information or resources, work will be put on hold
1.4 Describe different types of information, their source and how they are interpreted in relation to:
drawings, plans, risk assessments, method statements, specifications, schedules, site inspection reports, manufacturers' information, regulations and official guidance associated with protecting work
areas.
Job spec. is a like description of the quality of materials and details of any fixing and dimensions of the construction work to be used with drawings when building. Schedules are used for listing repetitive items in a construction project
Drawings can be a sketch of what is to be built. It will be very detailed and may be to scale.
Manufacturers information can be found on the product itself and identifies any hazards as well as controls and how the item should be handled or used. Concrete is considered a hazardous substance with control measures specified in any relevant data sheet
2. Know how to comply with relevant legislation and official guidance when establishing work area protection and safety 2.1 Describe their responsibilities regarding potential accidents and health hazards, whilst working:
in the workplace, below ground level, in confined spaces, at height, with tools and equipment, with materials and substances, with movement/storage of materials and by manual handling and mechanical
lifting.
For me when undertaking or being involved in this task. Also, the controls must be followed in other to avoid any form of accident in the first instance by avoiding the need to work at height wherever possible whilst PPE should be the last resort used.
Manual Handling can result to back injuries when not carried out correctly, always follow risk assessment and implement safe handling and lifting technique as well as lifting within individual capability. Tools and work equipment should be checked routinely and before use at work to ensure they are fit for purpose
and in good condition. In an emergency follow the site rescue or evacuation procedures
2.2 Describe the organisational security procedures for
tools, equipment and personal belongings in relation to site, workplace, company and operative.
Organisational security procedures could include safe and
locking of site during non-working hours, general public
should not be able to access site. If visitors do need to access site, they must be authorised and signed in. All tools and equipment should be stored safely and locked away
when not in use and at the end of each shift.
2.3 Explain what the accident reporting procedures are
and who is responsible for making reports.
If an accident happens on site, it should be reported immediately to the line manager or supervisor. If injury occurs, injured party should be given first aid by the site first aider, assistance to attend emergency department should be given if required. This should be recorded on the
books.
3. Maintain safe and healthy working practices when establishing work area protection and safety. 3.3 Explain why and when health and safety control equipment, identified by the principles of protection, should be used, relating to establishing work area protection and safety, and the types, purpose and limitations of each type, the work situation and general
work environment, in relation to:
collective protective measures
personal protective equipment (PPE)
respiratory protective equipment (RPE)
local exhaust ventilation (LEV).
Collective measures protect everyone on site affected by a particular hazard while PPE only protects the person wearing. The collective measures is better and more reliableRPE is an example of PPE that protect the lungs from construction dusts and fumes and many more hazards. The LEV is used to control dust or fumes from the source. This is highly recommended by the health and safety executive.
3.4 Describe how the relevant health and safety control equipment should be used in accordance with the
given instructions.
All relevant health and safety equipment in construction should be used in relevant work situations as stated in the health and safety regulations. Workers must be trained in using all equipment with the correct PPE. New workers to site should be inducted and have tool box talks, if unsure how to use anything on site, they should contact their line supervisor. Any query or incident in the work place should
be reported to site supervisor.
3.5 Describe how emergencies should be responded to in accordance with organisational authorisation and personal skills when involved with fires, spillages,
injuries and other task-related hazards.
Raise alarm in the event of an emergency, If you hear fire alarm and the alarm is continuous go to nearest fire exit, leave all tools and equipment and go to the fire assembly point. If spillages found or occur, ensure you are aware of
what it is; if appropriate clean up with appropriate spill kits
and dispose of correctly. If accident occurs at work inform first aider. If serious injury stay with injured party and ring ambulance or get colleague to do so. All accidents should
be reported in accident/ incident book.
4. Select the required quantity and quality of resources for the methods of work to establish work area protection and safety. 4.2 Describe the characteristics, quality, uses, sustainability, limitations and defects associated with the resources in relation to:
safety and security barriers
protection and safety notices
temporary structures
signs and lighting
hand and/or powered tools and equipment.
Security barriers often come in different types and shapes. The perimeter fencing is often made from aluminium and up to 2 metres in height. Crowd barriers are also made from aluminium or plastics and suitable for security and protecting exposed excavations. In windy or wintry conditions these are easily blown away.
There are various signage displayed for security purposes on site. Some of these are illuminated and not so much reliability on power to be noticed during emergency situations. Hand tools often range in sizes and are to be used in accordance with the manufacturers instruction. Misuse of hand tools are likely to result in serious injury or
accident.
4.3 Describe how the resources should be used correctly and how problems associated with the resources are
reported.
Always follow the manufacturers instructions when using any recources. If any issues arise, report them to the Supervisor or site manager or to the resource provider as per company procedures. To ensure productive work, adhere to organisational procedures by accurately measuring the jobs requirements including time and material needed. Make sure tools and materials are readily available as required to fulfill the work requirements. Effective planning and utilization of resources will contribute to successful completion of the job.
4.4 Explain why the organisational procedures have
been developed and how they are used for the selection of required resources.
Organisational procedures prevents theft, overordering and excessive stocking of material while ensuring suiffcient avaiblaity of productivity. They also ensure the use of approptriate material for each job. Handling materials should always align with the manufacturers instructions. risk assessment and if applicable the data sheets. Adhering to these guideliines ensures safety and optimal utilisation of materials on site.
4.5 Describe any potential hazards associated with the
resources and methods of work.
This can include injury from tool use, falls trips and slips from inadequate storage of resources, manual handling injuries through incorrect l handling. Exposure to hazardous substances, COSHH. Environmental risks associated to asbestos, mould and bacteria if not stored
correctly prior to use
4.6 Describe how to calculate quantity, length and area
associated with the method/procedure to establish work area protection and safety.
Estimate is done by the supervisors. All security equipment required to protect site are ordered by the manager and we then assist in the installation to meet the aesthetic and
quality requirement of the client
5. Minimise the risk of damage to the work and surrounding area when establishing work area protection and safety. 5.4 Describe how to protect work from damage and the purpose of protection in relation to general workplace activities, other occupations and adverse
weather conditions.
On construction sites the weather conditions are taken into consideration to ensure workers are not put at risk as a result. Materials are also stacked safely and not too high so it does not topple over. In cold weather we use frost blanket to cover the concrete.
5.5 Explain why the disposal of waste should be carried out safely in accordance with environmental responsibilities, organisational procedures, manufacturers information, statutory regulations
and official guidance.
Segregate wastes into different skips; this helps to ensure recycling of materials occurs. Company policy on waste management and recycling should always be adhered
to. All waste from work disposed onto different skips allows reusing of materials where possible. In line with the statutory regulations, only licensed waste carriers are to be
used to transport and dispose of waste materials
6. Complete the work within the allocated time when establishing work area protection and safety. 6.2 Describe the purpose of the work programme and explain why deadlines should be kept in relation to:
types of progress charts, timetables and estimated times
organisational procedures for reporting circumstances which will affect the work
programme.
The purpose of a programme is to show the duration of the works. The programme can identify problems or progress. It enables planning of materials plant and personnel and helps plan for remedial actions to get back onto schedule. Should there be a situation with resources that may cause delays to the work then we are to report to my supervisor
immediately
7. Comply with the given contract information to establish work area protection and safety to the required specification. 7.5 Describe how to apply safe and healthy work practices, follow procedures, report problems and establish the authority needed to rectify them, to:
plan for the protection and the safety of the work and surrounding environment
install, check and maintain the protection and safety equipment
dismantle and remove protection and safety equipment
install safety notices
install lighting systems
use hand tools, power tools and equipment
work at height
use access equipment
Principles of prevention or safe working practices include following work procedures, Safety work practice is a set guideline to help workers perform tasks that may require step by step procedure to ensure they remain safe. If changing blades, router bits etc always ensure power is turned off first.
Ensure PPE is worn when handling blades and hazardous tools and material. Ensure trained in safe use of tools and changing accessories. When using poker I rotate with my colleagues due to vibration exposure
All handling, test and transport of concrete should be carried out in manner that does not result in a spill or contact with the skin which could result in skin burn or dermatitis
7.6 Describe the needs of other occupations and how to effectively communicate within a team when
establishing work area protection and safety.
Through coordinated meetings this can be achieved. It is important the team know how to effectively communicate and understand the needs of other occupations. This can be achieved by ensuring all aware of site management requirements, plans of completion and deadlines for each part of the job.
7.7 Describe how to maintain the tools and equipment used when establishing work area protection and
safety.
All safety guards should be in place and available, all wires/cords should be checked to ensure they are not damaged. The tools should be dry and ensured that they have not got wet in storage. Oil or grease where necessary, PAT testing and daily prestart inspection is also essential.
Candidates name SarbjitSingh
Candidates signature DATE Units knowledge criteria achieved? YES NO Comments
Assessors name Assessors signature DATE UNIT E
Unit T/600/7007
Preparing Areas for Concrete Flooring in the Workplace
Learning Outcome: The learner will: Assessment Criterion: The Learner can:
1. Interpret the given information relating to the work and resources when preparing areas for concrete flooring. 1.3 State the organisational procedures developed to report and rectify inappropriate information and unsuitable resources and how they are
implemented.
I will stop and I would then wait instruction on how to proceed at the earliest opportunity. In the absence of the
correct information or resources, work will be put on hold
1.4 Describe different types of information, their source and how they are interpreted in relation to:
drawings, specifications, schedules,
manufacturers' information and regulations.
Job specs. is a written description of the quality of materials and details of any fixing and dimensions of the construction work to be used with drawings when building. Schedules are used for listing repetitive items in a construction project
Manufacturers information can be found on the product itself and identifies any hazards as well as controls and how the item should be handled or used. Building regulations should be followed at all times, its a procedure put in place to set a standard of work required by the builder. C
concrete is considered a hazardous substance with control measures specified in any relevant data sheet. This is important and will state the PPE required, how to store it and control any spill that may result.
2. Know how to comply with relevant legislation and official guidance when preparing areas for concrete flooring. 2.1 Describe their responsibilities under current legislation and official guidance whilst working:
in the workplace, below ground level, at height, with tools and equipment, with materials and substances, with movement/storage of materials
and by manual handling and mechanical lifting.
As per legislation and law avoid the need to work at height wherever possible whilst PPE should be the last resort used. Working below ground level risked being buried or crushed. Excavations must be adequately supported or battered. Risk assessment and emergency procedures must also be in place.
If manual Handling is not managed correctly, it can result to musculoskeletal injuries when not carried out correctly, always follow risk assessment and implement safe handling and lifting technique as well as lifting within individual
capability. Tools and work equipment should be checked
routinely and before use at work to ensure they are fit for
purpose and in good condition
2.2 Describe the organisational security procedures for tools, equipment and personal belongings in relation
to site, workplace, company and operative.
Cameras on site or CCTV, If visitors do need to access site, they must signed in. All tools and equipment should be stored safely and locked away when not in use, storage containers secured with good locks
2.3 State what the accident reporting procedures are
and who is responsible for making reports.
The incident should be entered into the accident book by the injured party if possible, or supervisor. If accident happen I tell my supervisor first or line manager and give a statement depending on what happened.
3. Maintain safe working practices when preparing areas for concrete flooring. 3.2 Explain why and when personal protective equipment (PPE) should be used, relating to preparing areas for concrete flooring and the types,
purpose and limitations of each type.
I wear my PPE according to RAMS. Concrete and cement are capable of causing burns to the skin and dermatitis in some cases due to strong nature of the chemical components. It is important to use hard hats, protective gloves on the hand and white coverall suit to prevent skin, eyeglasses to prevent contact with the eye, wellington boots to prevent contact with the feet during concrete works. PPE must be checked to ensure there is no damage otherwise it will not protect the user.
3.3 State how emergencies should be responded to in accordance with organisational authorisation and personal skills when involved with fires, spillages,
injuries and other task-related hazards.
This will have to be prompt. Raise alarm in the event of an emergency, If you hear fire alarm and the alarm is continuous go to nearest fire exit, leave all tools and equipment and go to the fire assembly point. If spillages found or occur, ensure you are aware of what it is; if appropriate clean up with appropriate spill kits and dispose of correctly. The quicker alarm is raised the better and faster the response will be.
4. Select the required quantity and quality of resources for the methods of work to prepare areas for concrete flooring. 4.1 Describe the characteristics, quality, uses, limitations and defects associated with the resources in relation to:
formwork, reinforcement, dowels, membranes, box outs, joint formers
hand and/or powered tools and equipment.
Rebar often comes in different sizes as per designers specifications. Structural concrete are often product of steel and concrete. These are often built to specifications and ranges from various types and shapes. Compaction equipment such as Wacker plate is to be operated by trained operative. All handling, test and transport of concrete should be carried out in manner that does not result in a spill or contact with the skin which could result in skin burn or dermatitis.
4.3 State how the resources should be used correctly, how problems associated with the resources are reported and how the organisational procedures are
used.
With any problems reported to site manager or provider of resources depending on the company procedures. Any resources should be used according to manufacturers
instructions.
4.4 Outline potential hazards associated with the
resources and method of work.
Slips trips and fall, manual handling injuries through incorrect, COSHH substances. Environmental risks associated to asbestos, poor work quality, poor supervision
4.5 Describe how to calculate quantity, length, area and wastage associated with the method/procedure to
prepare areas for concrete flooring
The quantity is calculate through the volume
*Length*Breadth and this will give the metre square of concrete required. Concrete is supplied to site as per request. All placing and finishing of concrete works are completed as per specification to ensure it meets the aesthetic and quality requirement of the client.
5. Minimise the risk of damage to the work and surrounding area when preparing areas for concrete flooring. 5.3 Describe how to protect work from damage and the purpose of protection in relation to general workplace activities, other occupations and adverse
weather conditions.
To prevent the risk of flooding and getting wet, work product and other materials are kept as dry as possible. Materials are also stacked safely and not too high so it does not topple over. When working in construction the weather conditions are taken into consideration to ensure workers are not put at risk as a result.
5.5 State why the disposal of waste should be carried
out in relation to the work.
All waste from work disposed onto different skips allows reusing of materials where possible. In line with the statutory regulations, only licensed waste carriers are to be
used to transport and dispose of waste materials
6. Complete the work within the allocated time when preparing areas for concrete flooring. 6.2 State the purpose of the work programme and explain why deadlines should be kept in relation to:
types of progress charts, timetables and estimated times
organisational procedures for reporting circumstances which will affect the work
programme.
This is done by my manager, The programme can identify problems or progress. It enables planning of materials plant and personnel and helps plan for remedial actions to get back onto schedule. Should there be a situation with resources that may cause delays to the work then we are
to report to my supervisor immediately.
7. Comply with the given contract information to prepare areas for concrete flooring to the required specification 7.3 Describe how to apply safe work practices, follow procedures, report problems and establish the authority needed to rectify them, to:
trim and compact sub-base to line and level
position and fix formwork and boxouts/isolation points to line and level
cut and install membranes
locate and secure joint/void formers
cut, locate and secure reinforcement and dowels
protect prepared area
use hand tools, power tools and equipment.
In order to achieve this, I follow the RAMS document. Ensure PPE is worn when handling blades and hazardous tools and material. Ensure trained in safe use of tools and changing accessories. All handling, test and transport of concrete should be carried out in manner that does not result in a spill or contact with the skin which could result
in skin burn or dermatitis
7.5 State the needs of other occupations and how to communicate within a team when preparing areas
for concrete flooring
This can be achieved by ensuring all aware of site management requirements, plans of completion and deadlines for each part of the job. Training sessions should be made available for all employees, toolbox talks should be held regularly and employees should be encouraged to attend. All communication across different occupational teams should be polite and clear. It is important the team know how to effectively communicate and understand the needs of other occupations.
7.6 Describe how to maintain the tools and equipment
used when preparing areas for concrete flooring.
All tools should be completely checked to ensure they are in good working order and comply with site regulations. All safety guards should be in place and available, all wires/cords should be checked to ensure not damaged. The tools should be dry and ensured that they have not got wet in storage.
Candidates name SarbjitSingh
Candidates signature DATE Units knowledge criteria achieved? YES NO Comments
Assessors name Assessors signature DATE UNIT F
Unit F/600/7012
Applying Surface Finishes to Concrete Flooring in the Workplace
Learning Outcome: The learner will: Assessment Criterion: The Learner can:
1. Interpret the given information relating to the work and resources when applying surface finishes to concrete flooring 1.3 State the organisational procedures developed to report and rectify inappropriate information and unsuitable resources and how they are
implemented.
This procedure is first discussed at the point of my induction. I would inform my supervisor, who would then refer to site manager for the appropriate information and any correction that needs to be effected. I would then wait instruction on how to proceed at the earliest opportunity. In the absence of the correct information or resources,
work will be put on hold
1.4 Describe different types of information, their source and how they are interpreted in relation to:
drawings, specifications, schedules,
manufacturers' information and regulations.
Specs., is a written description of the quality of materials and details of any fixing and dimensions of the construction work to be used with drawings when building. Schedules are used for listing repetitive items in a construction project.
Manufacturers information and guidance can be found on the product itself and identifies any hazards as well as controls and how the item should be handled or used. Building regulations should be followed at all times, its a policy and procedure put in place to set a standard of work required by the builder. Concrete is considered a hazardous substance with control measures specified in any relevant data sheet and this I must follow during my site works as a concrete finisher.
2. Know how to comply with relevant legislation and official guidance when applying surface
finishes to concrete flooring. 2.1 Describe their responsibilities under current legislation and official guidance whilst working: in the workplace, below ground level, at height, with
tools and equipment, with materials and substances,
with movement/storage of materials and by manual
handling and mechanical lifting.
According to my site induction my role is to comply with the site rules. Avoiding the need to work at height wherever possible whilst PPE should be the last resort used. Working below ground level risked being buried or crushed. Excavations must be adequately supported or battered. Risk assessment and emergency procedures must also be in place.
Manual Handling can result to musculoskeletal injuries when not carried out correctly, always follow risk assessment and implement safe handling and lifting technique as well as lifting within individual capability. ensure they are fit for purpose and in good condition.
2.2 Describe the organisational security procedures for
tools, equipment and personal belongings in relation to site, workplace, company and operative.
If visitors do need to access site, they must be authorised and signed in. All tools and equipment should be stored safely and locked away when not in use, storage containers with sturdy locks should be made available.
2.3 State what the accident reporting procedures are
and who is responsible for making reports
All incidents and accidents should be reported immediately. If injury occurs, injured party should be given first aid by the site first aider, assistance to attend emergency department should be given if required. The incident should be entered into the accident book by the injured party if possible, or supervisor
3. Maintain safe working practices when applying surface finishes to concrete flooring. 3.2 Explain why and when personal protective equipment (PPE) should be used, relating to applying surface finishes to concrete flooring, and the types,
purpose and limitations of each type.
Concrete and cement are capable of causing burns to the skin and dermatitis in some cases due to strong nature of the chemical components. It is important to use hard hats, protective gloves on the hand and white coverall suit to prevent skin, eye glasses to prevent contact with the eye, wellington boots to prevent contact with the feet during concrete works. PPE must be checked to ensure there is no damage otherwise it will not protect the user.
3.3 State how emergencies should be responded to in accordance with organisational authorisation and personal skills when involved with fires, spillages,
injuries and other task-related hazards.
Raise alarm in the event of an emergency, If you hear fire alarm and the alarm is continuous go to nearest fire exit, leave all tools and equipment and go to the fire assembly point. If spillages found or occur, ensure you are aware of what it is; if appropriate clean up with appropriate spill kits and dispose of correctly.
4. Select the required quantity and quality of resources for the methods of work to apply surface finishes to concrete flooring. 4.1 Describe the characteristics, quality, uses, limitations and defects associated with the resources in relation to:
structural concrete
reinforcement
consumables
compaction equipment
curing compounds/applicators
pedestrian or ride-on power floats
hand and/or powered tools and equipment.
According to design specifications, steel reinforcement often comes in different sizes. Structural concrete are often product of steel and concrete. From various types and shapes, these are often built to specifications and ranges . Compaction equipment such as Wacker plate is to be operated by trained operative. All handling, test and transport of concrete should be carried out in manner that does not result in a spill or contact with the skin which could result in skin burn or dermatitis
4.3 State how the resources should be used correctly, how problems associated with the resources are reported and how the organisational procedures are
used.
Follow the manufacturer's instructions when using resources. Report any issues to the site manager or resource provider as per company procedures. Apply organizational procedures to effectively plan and carry out work, ensuring productivity while meeting the requirements of your own and others' tasks. Accurately measure the job to determine the necessary time and materials. By following these steps, work can be completed efficiently and in accordance with organizational guidelines.
4.4 Outline potential hazards associated with the
resources and method of work.
The likely hazards associated with the resources and methods of work include injury from tool use, falls trips and slips from inadequate storage of resources, manual handling injuries through incorrect l handling. Exposure to hazardous substances, COSHH. Environmental risks associated to asbestos fibres, mould and bacteria if not
stored correctly prior to use
4.5 Describe how to calculate quantity, length, area and
wastage associated with the method/procedure to apply surface finishes to concrete flooring.
Quantity required for each use is normally estimated by
the site engineer prior to ordering the concrete to site and once this is done, concrete is supplied to site as per request. All placing and finishing of concrete works are completed as per specification to ensure it meets the aesthetic and quality requirement of the client.
5. Minimise the risk of damage to the work and surrounding area when applying surface finishes to concrete flooring. 5.3 Describe how to protect work from damage and the purpose of protection in relation to general workplace activities, other occupations and adverse
weather conditions.
To protect work products and materials, it's important to keep them dry and prevent exposure to water or flooding. Weather conditions are carefully considered in construction to avoid risks to workers. Materials are stacked safely, preventing them from toppling over. Electrical appliances are shielded or protected from wet conditions to prevent the risk of electrocution. These measures prioritize safety and ensure a secure working environment for construction projects.
5.5 State why the disposal of waste should be carried
out in relation to the work.
Proper waste segregation promotes material recycling. Adhere to company policies on waste management and recycling. Dispose of work-related waste in designated skips to facilitate material reuse whenever feasible. Ensure compliance with statutory regulations by using licensed waste carriers for waste transportation and disposal. By following these guidelines, we contribute to sustainable waste management practices and regulatory compliance.
6. Complete the work within the allocated time when applying surface finishes to concrete flooring. 6.2 State the purpose of the work programme and explain why deadlines should be kept in relation to:
types of progress charts, timetables and estimated times
organisational procedures for reporting circumstances which will affect the work
programme.
The programme is to show start and completion times of operations and the sequence of works. This is put together by my manager. These are contractual obligation and if they are not meant there can be financial penalties to the building contractor. The programme can identify problems or progress. It enables planning of materials plant and personnel and helps plan for remedial actions to get back onto schedule. Should there be a situation with resources that may cause delays to the work then we are to report to
my supervisor immediately.
7. Comply with the given contract information to apply surface finishes to concrete flooring to the required specification. 7.3 Describe how to apply safe work practices, follow procedures, report problems and establish the authority needed to rectify them, to:
place and compact concrete
screed concrete to finished level
set up, carry out pre-start checks and operate pedestrian power float or ride-on power float
achieve floated finish to concrete
cure concrete
use hand tools, power tools and equipment.
All handling, test and transport of concrete should be carried out in manner that does not result in a spill or contact with the skin which could result in skin burn or dermatitis.
Ensure PPE is worn when handling blades and hazardous tools and material. Ensure trained in safe use of tools and changing accessories.
Safety work practice is a set guideline to help workers perform tasks that may require step by step procedure to ensure they remain safe. If changing blades, router bits etc. always ensure power is turned off first. Simply follow the manufacturers instruction. A prestart inspection check is relevant to ensure equipment is fit for purpose.
7.5 State the needs of other occupations and how to communicate within a team when applying surface
finishes to concrete flooring
Effective communication and understanding between team members from different occupations are vital. This can be achieved by ensuring everyone is aware of site management requirements, completion plans, and deadlines for each job component. Providing training sessions, conducting regular toolbox talks, and encouraging employee attendance can enhance communication skills and promote a collaborative work environment.
7.6 Describe how to maintain the tools and equipment used when applying surface finishes to concrete
flooring.
As I was told during my site induction, It is my responsibility to check the tools before each use. And I always do this to check for defect.
Storage away from wet surface and maintenance of tools is important to assist with keeping them in good working order. Also check the cables from the poker i, avoid tugging of the chord and ensure the plug is not damaged.
Candidates name SarbjitSingh
Candidates signature DATE Units knowledge criteria achieved? YES NO Comments
Assessors name Assessors signature DATE
