Placing And Finishing Non-Specialist Concrete In The Workplace Assignment

Question

Q1. Interpret and extract relevant information from drawings, risk assessments, method statements, specifications, schedules and manufacturers' information.

Q2.Comply with information and/or instructions derived from risk assessments and method statements.

Q3.Describe the organizational procedures developed to report and rectify inappropriate information and unsuitable resources and how they are implemented.

Q4.Describe different types of information, their source and how they are interpreted in relation to: drawings, risk assessments, method statements, specifications, schedules, manufacturers' information and current regulations associated with placing and finishing non-specialist concrete

Q5.Describe their responsibilities regarding potential accidents and health hazards, whilst working:- in the workplace, below ground level at height, with tools and equipment, with materials and substances, with movement/storage of materials and by manual handling and mechanical lifting.

Q6.Describe the organizational security procedures for tools, equipment and personal belongings in relation to site, workplace, company and operative.

Q7.Explain what the accident reporting procedures are and who is responsible for making reports.

Q8.Use health and safety control equipment safely to carry out the activity in accordance with current legislation and organizational requirements when placing and finishing non-specialist concrete.

Q9.Comply with information relating to specific risks to health when placing and finishing non-specialist concrete

Q10.Select resources associated with own work in relation to materials, components and fixings, and tools and equipment.

Q11.Describe the characteristics, quality, uses, sustainability, limitations, and defects associated with the resources in relation to: concrete, fabric reinforcement, timber, plywood, proprietary slab edgings and fixings hand tools and equipment.

Q12.Describe how the resources should be used correctly and how problems associated with the resources are reported.

Q13. Explain why the organizational procedures have been developed and how they are used for the selection of required resources.

Q14.Describe any potential hazards associated with the resources and methods of work

Q15.Describe how to calculate quantity, length, area and wastage associated with the method/procedure to place and finish non-specialist concrete.

Q16. Protect the work and its surrounding area from damage in accordance with safe working practices and organizational procedures.

Q17.Minimize damage and maintain a clean work space.

Q18. Dispose of waste in accordance with current legislation.

Q19.Describe how to protect work from damage and the purpose of protection in relation to general workplace activities, other occupations and adverse weather conditions.

Q20.Explain why the disposal of waste should be carried out safely in accordance with environmental responsibilities, organizational procedures, manufacturers information, statutory regulations and official guidance

Q21.Demonstrate completion of the work within the allocated time.

Q22.Describe the purpose of the work programme and explain why deadlines should be kept in relation to: types of progress charts, timetables and estimated times organizational procedures for reporting circumstances which will affect the work programme.

Q23. Demonstrate the following work skills when placing and finishing non-specialist concrete: measuring, marking out, laying, compacting, finishing, positioning and securing.

Q24.Lay and finish concrete to given working instructions for three of the following: concrete slabs/bases (footing, oversites or paths) form slab edging position reinforcement form surface finish (tamped, floated, brushed and trowelled).

Q25.Safely use materials, hand tools and ancillary equipment.

Q26.Safely store the materials, tools and equipment used when placing and finishing non-specialist concrete.

Q27. Describe how to apply safe and healthy work practices, follow procedures, report problems and establish the authority needed to rectify them, to: handle, transport and test concrete transport, lay, compact, cure and protect concrete with tamped, floated, brushed and trowelled finishes cure and protect place fabric reinforcement concrete mix ratios (volume and gauge boxes) place concrete into formwork and shuttering form slab edging work with plant and machinery use hand tools and ancillary equipment.

Q28.Describe the needs of other occupations and how to effectively communicate within a team when placing and finishing non-specialist concrete.

Q29. Describe how to maintain the tools and equipment used when placing and finishing non-specialist concrete

Are you struggling to keep up with the demands of your academic journey? Don't worry, we've got your back! Exam Question Bank is your trusted partner in achieving academic excellence for all kind of technical and non-technical subjects.

Our comprehensive range of academic services is designed to cater to students at every level. Whether you're a high school student, a college undergraduate, or pursuing advanced studies, we have the expertise and resources to support you.

To connect with expert and ask your query click here Exam Question Bank