Bush Fire Assessment Report
- University :
others Exam Question Bank is not sponsored or endorsed by this college or university.
- Country :
Australia
Task
Participants are required to locate a parcel of land on the urban bushland interface and prepare a plan of subdivision for a residential development. There are to be at least 20 residential (or rural- residential) allotments in the final design. The development may be SEPP Seniors Living (retirement home) if in NSW, Tasmania or Victoria but the proposal will need to comply with the restrictions for that type of development.
Participants are to approach this assignment from a Bushfire Consultant perspective.The purpose of the assignment is to develop a report suitable for submission to the Council and the Fire Service. The report must deal with the critical policy issues of the relevant legislation that has been identified in the notes and during the workshop period.
Although not exclusive, the report should include the following:
- Comply with any requirements of your jurisdiction in relation to access, water, setbacks and You should also consider refuge areas and landscaping if relevant.
- A description of the site and the proposed development. This must include photographs of the site and the bushland that will impact onto the site. As aerial photograph of the area would be of assistance and this can be included as an
- Identification of the bushland impacting onto the site and the potential bushfire
- Do not try and develop alternative solutions for construction in this
- Identification of critical and significant areas that also impact onto the site (e.g. critical habitats, threatened species, Aboriginal relics, ). These may be referred to as attachedreports” from specialists in the relevant fields. You do not need to prepare these reports but you will need to highlight the areas on the final plan of subdivision.
- A sketch of the proposed subdivision layout including the road network and widths, water, APZs/BAL levels and lot layout. This is to be an appendix to the report. This sketch can be freehand if you do not have access to other means, but should include an aerial photo of the You should look at the draft Contents offered in vUWS for subdivisions.You will be significantly marked down if you cannot comply with the acceptable solutions within PBP 2006 (or similar document) and AS3959-2009 criteria of the document in particular. WA students use their own documents.